Arduino MATERIA 101 Bedienungsanleitung PDF herunterladen (Seite 13)

Assembly Manual

Arduino Materia 101

BasE assEmBly

Fig. 12

Fig. 14

Fig. 13

Fig. 15

Fig. 12 - 13

Remove screw no. 1 and 3 with a

crosshead screwdriver (fig. 12) from

the bottom of the tray (fig. 13).

Fig. 14 - 15

Secure the Z motor. You need M3x35

bolts (2) and o-rings (2). O-rings

are necessary to soften the motor

vibrations. Put M3x35 bolts in

position 1 and 3 from the rubber feet

side. From the other side of the tray,

place o-rings on the bolts then tightly

secure the Z motor to the bolts. The

o-rings must lie under the motor.

Remove the bar cover and unscrew

the brass nut block from the Z screw.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 54 55

Keine Kommentare

Arduino MATERIA 101 Bedienungsanleitung Seite 13